Flowmaster
Flowmaster 2020057 Catalytic Converter - Direct Fit - Federal
Flowmaster 2020057 Catalytic Converter - Direct Fit - Federal
Low stock: 2 left
Couldn't load pickup availability
Description & Features
Flowmaster 2020057 Catalytic Converter - Direct Fit - Federal
Flowmaster's new Federal legal direct fit catalytic converter is for the 1984-1995 Ford F-150, F-250 and the 1985-1995 Bronco with the 5.0L engine. This stainless steel unit is a two piece assembly with a mandrel bent Y-pipe and a single converter assembly which connects to the factory exhaust system. Hardware and gaskets are included. This converter meets or s the USEPA standards and includes a 25,000 mile emissions, and 50,000/5 year exterior warranty. Please note: These USEPA Federal converters are not available for sale or use on vehicles licensed or operated in the state of California.
- Flowmaster Quality
- Meets or exceeds all USEPA 49-state requirements
- Direct Fit
- Stainless Steel
Specifications
| Air Tube Adaptable | No |
| Air Tube Count | 1 |
| Assembly Length | 12.50 |
| Assembly Width | 7.50 |
| Body Height | 3.875 |
| Body Length | 12.50 |
| Body Shape | Oval |
| Body Type | Clam Shell |
| Body Width | 7.38 |
| Brand | Flowmaster |
| California Air Resources Board (CARB) Certified | No |
| California Proposition 65 Chemical Name | Nickel (Metallic) |
| California Proposition 65 Required | Yes |
| CARB (California) Compliant | No |
| CARB Executive Order Number | Not Applicable |
| Category | Exhaust |
| Clamps Included | No |
| Converter Quantity | 1 |
| Emission Code | 2 |
| Finish | Natural |
| Fitment | Direct Fit |
| Grade | Premium Grade |
| Grade Type | Premium Grade |
| Hangers Included | No |
| Heat Shield Attached | Yes |
| Heat Shield Material | Aluminum |
| Inlet Connection Type | Flanged |
| Inlet Diameter | 2.00 |
| Inlet Gasket Included | No |
| Inlet Inside Diameter | 1.93 |
| Inlet Mounting Hardware Included | No |
| Inlet Mounting Hole Quantity | 4 |
| Inlet Orientation | Angled |
| Inlet Outside Diameter | 2.06 |
| Inlet Quantity | 2 |
| Inlet Type | Flanged |
| Location | Right |
| Material | Stainless Steel |
| Mounting Hardware Included | No |
| New York Certified | No |
| Outlet Connection Type | Clamp On |
| Outlet Diameter | 2.25 |
| Outlet Gasket Included | No |
| Outlet Inside Diameter | 2.12 |
| Outlet Mounting Hardware Included | No |
| Outlet Mounting Hole Quantity | 0 |
| Outlet Orientation | Straight |
| Outlet Outside Diameter | 2.25 |
| Outlet Quantity | 1 |
| Outlet Type | Clamp-On |
| Oxygen Sensor Location | Pre Catalyst |
| part type | Catalytic Converter |
| Product Type | Catalytic Converter |
| Sensor Port Count | 1 |
| Sub Category | Catalytic Converter |
| Substrate Material | Ceramic |
| Tube Material | 409 Stainless Steel |
| Universal Or Specific Fit | Specific Fit |
Packaging Information
Weight: 27.45 lbs
Dimensions: 49 x 25 x 14 IN
Safety
⚠ WARNING: This product can expose you to chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information visit www.P65Warnings.ca.gov
Warranty
Share
Vehicle Fitment
Vehicle Fitment
- 1985-1993 Ford Bronco Custom
- 1985-1995 Ford Bronco Eddie Bauer
- 1990-1995 Ford Bronco XL
- 1985-1992 Ford Bronco XLT
- 1994-1995 Ford Bronco XLT
- 1993 Ford Bronco XLT Lariat
- 1992 Ford Bronco XLT Nite
- 1995 Ford Bronco XLT Sport
- 1984-1986 Ford F-150 Base
- 1987-1992 Ford F-150 Custom
- 1995 Ford F-150 Eddie Bauer
- 1995 Ford F-150 Special
- 1984-1995 Ford F-150 XL
- 1984 Ford F-150 XLT
- 1993-1995 Ford F-150 XLT
- 1985-1992 Ford F-150 XLT Lariat
- 1984-1986 Ford F-250 Base
- 1987-1992 Ford F-250 Custom
- 1995 Ford F-250 Eddie Bauer
- 1995 Ford F-250 Special
- 1984-1995 Ford F-250 XL
- 1984 Ford F-250 XLT
- 1993-1995 Ford F-250 XLT
- 1985-1992 Ford F-250 XLT Lariat
