Hellwig 2510 LP-25 Progressive Rate Load Leveler Helper Springs

Hellwig 2510 LP-25 Progressive Rate Load Leveler Helper Springs

The Hellwig LP-25 Helper Spring set the standard for all other aftermarket helper springs. Featuring a Progressive Rate design with up to 2,500lb level load weight capacity, it is the workhorse of the Hellwig Spring line. This is ideal for fleet applications or vehicles that consistently carry a heavy load day in and day out. ATTENTION: MUST PURCHASE LP MOUNGTING KIT FOR INSTALLATION. IF EQUIPPED WITH FACTORY CONTACT OVERLOAD SPRINGS CHECK VEHICLE FITMENT ABOVE FOR SPECIFIC INFORMATION ON YOUR YEAR AND MODEL VEHICLE.

• 1 ton applications
• Easy Installation
• Install Kit Required (see LP installation kits)
• Level Load Capacity up to 2,500lbs
• Tunable

Weight: 43 lbs
Dimensions: 43 x 7.5 x 2 IN

WARNING: Cancer and Reproductive Harm - www.p65warnings.ca.gov

For more information visit www.P65Warnings.ca.gov

View Installation Instructions (PDF)

• 2500 lbs. Capacity; 3 Leaf Stack For Leaf Spring Applications; Requires Mounting Kit PN[25250 Or 25300]
• 2500 lbs. Capacity; 3 Leaf Stack For Leaf Spring Applications; Requires Mounting Kit PN[25250 Or 25300]; Dually Bed; Do Not Use w/ Factory Overload Contact Springs
• 2500 lbs. Capacity; 3 Leaf Stack For Leaf Spring Applications; Requires Mounting Kit PN[25250 Or 25300]; Not for use with factory contact overload springs. Must remove factory overload contact springs - removal of contact overload springs may require U-bolt and center bolt replacement
• 2500 lbs. Capacity; 3 Leaf Stack For Leaf Spring Applications; Requires Mounting Kit PN[25250 Or 25300]; Will Not Fit w/ Rear A.C.
• 2500 lbs. Capacity; 3 Leaf Stack For Leaf Spring Applications; Requires Mounting Kit PN[25250 Or 25300]; Do Not Use w/ Factory Overload Contact Springs
• 2500 lbs. Capacity; 3 Leaf Stack For Leaf Spring Applications; Requires Mounting Kit PN[25250 Or 25300]; Not for use with factory contact overload springs. Must remove factory overload contact springs - removal of contact overload springs may require U-bolt and center bolt replacement.
• Requires Mounting Kit PN[25250 Or 25300]; 3 Leaf Stack For Leaf Spring Applications; 2500 lbs. Capacity
• 2500 lbs. Capacity; 3 Leaf Stack For Leaf Spring Applications; Requires Mounting Kit PN[25250 Or 25300];
• 2500 lbs. Capacity; 3 Leaf Stack For Leaf Spring Applications; Requires Mounting Kit PN[25250 Or 25300];; Will Not Fit w/ Rear A.C.