Mishimoto

Mishimoto MMICP-BR27-21USBK Intercooler Pipe Kit, Black, fits Ford Bronco 2.7L 2021+

$949.95 USD

Sale Sold out

Shipping calculated at checkout.

Low stock: 2 left

Description & Features

Mishimoto MMICP-BR27-21USBK Intercooler Pipe Kit, Black, fits Ford Bronco 2.7L 2021+

Mishimoto has developed a direct-fit intercooler pipe upgrade kit for the 2021+ Ford Bronco 2.7L EcoBoost that allows you to maximize the performance potential of your 2.7L Bronco. This pipe kit is specifically designed for customers who have previously purchased the Mishimoto performance stock location intercooler and would like to couple it with the Mishimoto pipe kit. This kit includes all the components you will need to upgrade your setup to the full Mishimoto charge air system.----Our intercooler pipes are constructed from cast and mandrel-bent aluminum for unsurpassed durability. Unlike the stock plastic pipes, our cast-aluminum hot-side Y-pipe and throttle body inlet provide superior resistance to cracking after thousands of heat cycles. For even more durability, we've replaced the factory rubber sections with mandrel-bent aluminum for significantly increased boost tolerance. Serrated coupler connections at the Y-pipe and throttle body ensure your boost stays where you want it under even the most extreme conditions.----But durability isn't the only benefit these pipes offer. The Mishimoto performance intercooler pipes reduce restriction by up to 34.2-percent over the stock pipes. That increase in flow allows your Bronco to pull in more air for power gains of over 13 HP and 16 lb.-ft. of torque on the stock tune when added to the Mishimoto stock location intercooler.----If you're ready to let your 2021+ Ford Bronco 2.7L EcoBoost breathe as free as it can run, these Mishimoto Performance Intercooler Pipes are for you. And, like all Mishimoto products, they're backed by our Lifetime Warranty, so you can drive easy knowing we've got you covered.

Up to 34.2-percent less restrictive than stock pipes
Dyno-proven power gains of 13.6 HP and 16.7 lb-ft. of torque on stock tune
2-1/4-inch to 2-1/2-inch hot-side piping and 2-3/4-inch cold-side piping

Specifications

Clamp Quantity	18
Clamp Type	Worm Gear
Clamps Included	Yes
Cold Side Pipe Inside Diameter	0
Coupler Color	Black
Coupler Material	Silicone
Finish	Powder Coated
Hot Side Pipe Inside Diameter	0
Pipe Bend Type	Mandrel
Pipe Color	Black
Pipe Material	Aluminum
Pipe Quantity	8
SellingPoint10	Includes Mishimoto Silicone Boots with DuraCore technology for superior resistance to heat, pressure, fuel, and oil
SellingPoint11	Constant-tension worm gear clamps keep a strong grip as pipes expand and contract
SellingPoint12	Patent No. US D1,051,944 S
SellingPoint13	Mishimoto Lifetime Warranty
SellingPoint14	N/A
SellingPoint15	N/A
TechSpec Applications	2021+ Ford Bronco V6 2.7L Turbo
TechSpec Engine Codes	2.7L EcoBoost
TechSpec Chassis Codes	U725
TechSpec Maximum Recommended Boost Pressure (PSI)	N/A
TechSpec Maximum Recommended Horsepower	N/A
TechSpec Overall Length (in)	N/A
TechSpec Overall Height (in)	N/A
TechSpec Overall Width (in)	N/A
TechSpec Core Type	N/A
TechSpec Core Thickness (in)	N/A
TechSpec Core Length (in)	N/A
TechSpec Core Height (in)	N/A
TechSpec Inlet (in)	N/A
TechSpec Outlet (in)	N/A
TechSpec Weight (lbs)	18.85
TechSpec Note	N/A
TechSpec Includes	(4) Hot-Side Intercooler Pipes--(2) Cold-Side Intercooler Pipes--(9) Silicone Couplers--(2) CNC-Machined Intercooler Adapters--(18) Worm Gear Clamps--Mounting Hardware--Mishimoto Lifetime Warranty
TechSpec Installation Notes	N/A
TechSpec Pipe Shape	N/A
TechSpec Pipe Diameter	N/A
TechSpec Pipe Length	N/A
TechSpec Centerline Radius	N/A
Install Difficulty	4
SellingPoint01	Direct fit for 2021+ Ford Bronco 2.7L EcoBoost with Stock Location Intercooler
SellingPoint02	Up to 34.2-percent less restrictive than stock pipes
SellingPoint03	Dyno-proven power gains of 13.6 HP and 16.7 lb-ft. of torque on stock tune
SellingPoint04	2-1/4-inch to 2-1/2-inch hot-side piping and 2-3/4-inch cold-side piping
SellingPoint05	Includes CNC-machined intercooler outlets for unrestricted flow from piping to intercooler
SellingPoint06	Constructed from durable cast and mandrel-bent aluminum for superior boost tolerance
SellingPoint07	Serrated coupler connections ensure a secure fit under high boost pressures
SellingPoint08	Micro-wrinkle black powder coat adds stealthy style and protects pipes from the elements
SellingPoint09	1/8-NPT port in cold-side pipe for methanol injection or additional sensors