ReadyLift 49-19610 Suspension Lift Kit

ReadyLift 49-19610 Suspension Lift Kit

ReadyLIFT is excited to announce PN: 49-19610, an all-new 4-corner coil spring 6" lift kit with Falcon 1.1 Monotube shocks for the 2019-2023 Ram 2500 HD trucks equipped with the Standard Output Cummins turbodiesel engine providing plenty of clearance for an aggressive 37x12.5 tire and up to -18 offset wheel with no rubbing; delivering a beefy, tough look. The 49-19610 is specifically designed for Ram Heavy Duty applications with proprietary front and rear coil springs, heavy-duty radius arm drop brackets, heavy-duty fabricated steel front and rear track bar brackets, forged dropped pitman arm, front/rear sway bar relocation brackets and bump stop extensions preventing over-compression of the new Falcon 1.1 Monotube front & rear shocks that are included in this premium kit. This kit includes a unique CNC-machined 6061-T6 billet Aluminum Driveline Indexing System (DIS) that re-clocks the transfer case aligning the front output shaft for improved driveline angles. Some Ram HD trucks can experience a slight vibration after lifting due to driveline angle sensitivity. ReadyLIFT 6" lift kit with the Drive Line Indexing System (DIS) addresses this condition by re-clocking [indexing] the transfer case and providing a stout heavy-duty steel cross member that accommodates the new T-case position, all resulting in a smooth driving experience on or off-road.

• Designed for Ram Heavy Duty applications
• Proprietary front and rear coil springs
• Heavyduty radius arm drop brackets
• Heavyduty fabricated steel front and rear track bar brackets
• Forged dropped pitman arm
• Front/rear sway bar relocation brackets
• Bump stop extensions
• Prevents overcompression of new Falcon 1.1 Monotube front & rear shocks
• Premium kit includes Falcon 1.1 Monotube front & rear shocks
• Only available for 2500 HD Standard Output Motor and 68RFE Transmission
• Note: Single Cab configuration not validated for fitment & drivability by ReadyLIFT
• Heavy Heavyduty radius arm drop brackets
• Heavy Heavyduty fabricated steel front and rear track bar brackets
• Prevents over Prevents overcompression of new Falcon 1.1 Monotube front & rear shocks

Weight: 323 lbs
Dimensions: 47.75 x 12.625 x 24 IN

⚠ WARNING: This product can expose you to chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information visit www.P65Warnings.ca.gov